Operating Manual BKS600A
47
Error
Cause
Corrective action
Subprint missing
contact FMS AG
One or more subprints are
missing or are not detected
Check if subprints are seated correctly (ref. to
„14.1 Additional Setting Elements“)
Contact FMS customer service
System Error
contact FMS AG
Electronic unit defect
Contact FMS customer service
No message on the
display
Display contrast setting is
bad
Set display potentiometer P200 correctly (ref.
to „14.1 Additional Setting Elements“)
Fuse blown
Replace fuse (ref. to „14.1 Additional Setting
Elements“)
Power supply not correct
Check status LED’s of the power supply
(D111...D115, ref. to „14.1 Additional Setting
Elements“)
Check / correct power supply
Electronic unit defect
Check status LED’s of the power supply
(D111...D115, ref. to „14.1 Additional Setting
Elements“)
Contact FMS customer service
Electronic unit does
not answer to interface
commands
Interface not supported yet
Contact FMS customer service
