Operating Manual BKS600A
42
14.3
Jumper for the Analog Inputs / Outputs
fig. 27
E600005e
Caution
Wrong setting of the jumpers and solder bridges may cause malfunction of the electronic unit
or the total system! Setting of the solder bridges and jumpers must be checked carefully prior
to power on! Setting of the solder bridges should be carried out by trained personnel only!
Note
On the subprint, the solder bridges which are closed by default are made with small printed
bridges. When opening the solder bridges the first time these printed bridges must be cut.
Otherwise malfunction can be the result!
