Operating Manual BKS600A
21
8.4
Manual Operation
The special functions (ref. to fig. 16) provide the following possibilities for manual operation:
Manual operation, generally
•
Center:
(Only with FMS steering device) The steering device will return to its center
position with the
↵
key (also possible by digital input).
•
Manual:
The steering device can be moved manually in steps of 0.1mm to the left with the
↑
LEFT
key and to the right with the
↓
RIGHT
key. If the key is hold for more than 1s, the
steering frame moves continuously in the respective direction.
Manual operation with linear units
•
Detection:
Edge detecion is started with
↵
key and the center of the sensor will be aligned
to the web edge. If required, the sensors are moved away from the web and then are moved
back again to the web. The detection is completed if the edge is read. It then goes stright
through the center of the active window.
•
Freerun:
The sensor freerun is started with
↵
key. The sensors will move to the reference
position of the linear units.
•
Sensor left / Sensor right:
The left or right sensor can be moved manually in steps of
0.1mm to the left with the
↑
LEFT
key and to the right with the
↓
RIGHT
key. If the key is
hold for more than 1s, the sensor moves continuously in the respective direction.