Operating Manual BKS600A
4
2
Definitions
Left and Right:
Left and right are always seen in direction of the running web.
Linear unit:
Motorized Sensor adjustment (option). The sensor is adjusted automatically by a
linear guide with stepper motor to the edge or line to be detected.
Steering device:
Hydraulic cylinder, steering frame or similar actuator.
Dead band:
A free programmable range of tolerance in which the web may move freely
without readjusting the steering device. Keep in mind that „0.3mm“ means ±0.3mm.
If the deviation is higher than the tolerance, the web will be readjusted into the range of the
dead band.
Subprint:
Electronic extension module which can be plugged to the main board of the
electronic unit if required. That way, the possibilities of the electronic unit can be extended
easily.
3
System Components
A BKS600A web guiding system consists of the following components (refer also to fig. 1):
Steering device
•
Electrically or hydraulically driven
Electronic unit BKS600A
•
For all control functions
•
With operation panel for parametrization
•
Steering frame with DC motor or analog control output
±10V / 0...10V / 0...20mA / 4...20mA
•
Power amplifiers for the stepper motors of the linear units
•
Interface RS232, PROFIBUS, CAN-Bus, DeviceNet
•
Digital inputs and outputs
•
Remote control box
•
With robust aluminium housing
Sensors
•
For detection of web edge
•
1 or 2 analog sensors
Linear units
•
linear units with two phase stepper motor and limit switch for reference
(components and variants in italic letters are options)
