Operating Manual BKS600A
15
7.3
Mounting the Steering Device
Mounting and wiring is done according to manufacturer’s specifications. Take care that the
steering device is mounted in the right position regarding the running direction of the material
web. If a steering frame is used, the pivot point mus be located at the entry side and the edge
sensors must be located at the exit side (fig. 13).
Wiring to the screw terminals of the electronic unit is done according to wiring diagram (fig.
8).
fig. 13: Notice the running direction of the web when mounting the steering device.
K600005e
7.4
Mounting of Manual Sensor Adjustment
The manual sensor adjustment must be installed
after
the steering device regarding running
direction (fig. 13). It will be mounted directly to the machine frame.
The sensors can be moved on the location rail. Use the fixing nut to lock the sensor.
Note
For optimum control results, the sensors adjustment has to be placed in a way that the sensors
are placed next to the exit roller of the steering frame. If the sensors are placed far from the
steering frame, control dynamics will be reduced drastically.