FT-10 Fill Technical Manual, Rev. 2.21, July 2020
Page 10 of 131
FT-10 FILL CO CANopen
Communication:
Data rate:
10 kbit/s
– 1 Mbit/s (selectable) kbit/s
ESD file
Generic EDS-file provided
Topology:
Line with Trunkline, Dropline structure and Termination at both Ends
Line length depending on baud rate 25
– 500 meter.
Installation:
2 wire shielded twisted pair cable
Alternatively 4 wire with 24 Volt power over the bus
Max. Stations:
Up to 127 stations per network
Isolation
Galvanically isolated bus electronics
Response speed:
Up to 4 ms response delay after read/write commands
FT-10 FILL EI EtherNet/IP
Communication
Data rate
10 kbit/s
– 100 Mbit/s, full duplex
ESD file
Generic EDS-file provided
DLR (Device Level
Ring)
Available
TCP/IP settings
DHCP or manual IP assign over EtherX PC Software.
Device identity customization
Topology
Line, Bus, Star or Tree topology depending on physical media
Installation
Switched Ethernet transmission with shielded twisted pair cables and RJ-45
connectors.
Web client
Available
FT-10 FILL EC EtherCAT
Communication
Data rate
100 Mbit/s, full duplex
ESD file
Generic EDS-file provided
Topology
Line, Tree, Star or Daisy-chain topology depending on physical media
Installation
Switched Ethernet transmission with shielded twisted pair cables and RJ-45
connectors.
Isolation
Galvanically isolated bus electronics
Response speed
Up to 4 ms. response delay after read/write commands.
Topology
Line, Tree, Star or Daisy-chain topology depending on physical media
FT-10 FILL CC CC-Link
Communication
Data rate
156 kbit/s
– 10 Mbit/s (selectable)
Topology
Line with Trunkline, Branch structure and Termination at both Ends.
Installation
3 wires shielded twisted pair cable.
Max. Stations
Up to 64 stations per network
Isolation
Galvanically isolated bus electronics
Response speed
Up to 4 ms. response delay after read/write commands
Data rate
156 kbit/s
– 10 Mbit/s (selectable)
