Flavor Burst FB 80Sa-08, Manual, Page: 70 / 76

69
MALFU
NCT
ION IN TH
E
BLENDI
NG ASSE
MBL
Y
-
CONTIN
UED
Corrective Action
Install the Blending Head onto the Adapter according to
instructio
ns
.
Lube and in
stall the
lower o-ring ont
o the
Adapter according to instructions. Replace the
worn o-ring. Always kee
p
replacements in the Spa
re Parts Kit.
Call for service or replace the Adapter. Call for service or replace the Blending Head. Lube and in
stall the
small black o-ring
according to
instructio
ns
.
Install the 9-
Tube Asse
mbly couple
r
according to
instructio
ns. Ensure th
at the
coupler is
lo
cked in p
lace by insert
in
g it fully
into the ope
ning and rot
a
ting it off-center.
Replace the
9-Tube Assembly.
Probable Cause
The Blendin
g
Head is n
o
t properly installed
onto the Spout Adapter. The lower black o-ring is not present
on the
outside of th
e Spout Adapter.
The lower black o-ring of
the Adapter is
worn. The Spout Adapter is fau
lty.
The Blendin
g
Head is fa
ulty.
The small black o-ring is not present
in the
syrup line
o
pening of th
e Blending
Head.
The 9-Tube Assembly coupler is not properly secured to the
Blending Head
syrup line
o
pening.
The 9-Tube Assembly is faulty.
Problem
Product mix is leaking fr
om the locking
collar on the
Blending Head.
Flavoring or
sanitizing pr
oduct is
leaking
from the Blending Head syrup line
o
pening.