Flavor Burst FB 80Sa-08, Manual

Page: 48 / 76

47
4. Remove the protective tape from the
adhesive pad. Attach the Keypad bracket
assembly to the desired mounting area.
Ensure there is enough room between the
Keypad assembly and the freezer face to
slide the Keypad off and on the Bracket for
daily cleaning. (See Figure 112.)
26122
Figure 112
5. Fully insert the Keypad stereo plug into the
Spigot Switch jack and ensure that the
connection is fully engaged. (See
Figure 113.)
26123
Figure 113
6. Adjust the angle of the Keypad by loosening
the bottom hand knob of the bracket and
swinging the keypad upward. The Keypad
hinges on the upper hand knob. Secure the
Bracket by tightening the hand knobs. (See
Figure 114.)
26124
Figure 114
Connecting the Unit Syrup Line
The syrup lines attached at the lower back of
the cabinet connect the eight bags of syrup to
the Blending Assembly, with the ninth tube
connecting the Sanitizer Tank to the Blending
Assembly.
1. Locate the 9-Tube Lead at the back of the
cabinet. Remove the dust cap and slide the
coupler casing toward the unit to expose the
lead line coupler. (See Figure 115.)
Figure 115
2. Align the 9-hole gasket with the coupler pins
of the Lead and place the 9-hole gasket on
the coupler. (See Figure 116.)
Figure 116
3. Align the coupler pins of the two syrup lines
and connect the assemblies. (See
Figure 117.)
Figure 117