28
12. Connect the Syrup Bag Connector to the
syrup bag fitment by sliding the Connector
Head back, installing the Connector fully
onto the fitment, and then releasing the
head to secure the connection. (See
Figure 44.)
26275
Figure 44
13. Select and touch the number corresponding
with the new syrup flavor to prime the pump.
14. Place a container under the Blending Head
to catch residual sanitizer solution and/or
fresh product to be dispensed and press
WATER / SYRUP FLUSH to prime the
syrup line. (See Figure 45.)
26251
Figure 45
15. Once syrup flows consistently from the
Blending Head, press CANCEL ENTRY to
complete the procedure.
NOTE:
THE PUMP FLUSH FUNCTION WILL
AUTOMATICALLY SHUT OFF AFTER 15
MINUTES.
NOTE:
YOU MAY WANT TO PROCEED WITH
STEP 16 AS TIME ALLOWS DURING THE
PUMP FLUSH FUNCTION IF AN ADDITIONAL
FLAVOR NEEDS TO BE INSTALLED.
16. Repeat this entire process for each
additional flavor to be installed.
17. When no additional flavors need to be
installed, press the WATER / SYRUP
FLUSH key to clean the Blending Head.
(See Figure 46.)
26250
Figure 46
Summary of Contents for FB 80Sa-08
