Flavor Burst FB 80INT-08, Manual

Page: 79 / 85

78
MALFUNCT
ION IN THE INJECTOR ASSEMBL
Y
Corrective Action
Plug the Keypad stereo
plug into the
Switch
jack until the
y
are fully e
ngaged.
Call for service. Call for service or replace the Spigot Switch. Call for service to replace the microprocessor. Install the In
jector Head
onto the Adapter
according to
instructio
ns, ensuring th
at the
locking r
ing is securely lo
cked onto th
e
Adapter locking tabs. Replace the
o-rings in th
e Spout Adapter.
Decrease th
e rate of the
freezer’s f
lo
w
according to
freezer manufacturer’s
instruction
s
.
Install the S
pout Adapter according t
o
instruction
s
.
Install the A
dapter onto
the spout according
to instruct
io
ns. The Ad
apter should
snap
evenly and t
ightly onto t
he spout.
Remove the Adapter from the spout. Lube and install t
he black o-ring and gasket
inside the A
dapter accor
d
ing to instr
u
ctions.
Replace the
items. Always keep
replacements in the Spa
re Parts Kit.
Call for service or replace the Adapter.
Probable Cause
The Switch stereo plug
and Keypad jack
are unplugg
ed or not fully engaged.
The Drive Motor is fault
y
.
The Spigot Switch is fa
ulty.
The Drive Motor relay on
the
microprocessor is faulty. The Injector
Head is not
properly inst
alled
onto the Spout Adapter. The Spout Adapter o-rin
g
s are worn.
The flow rate of the pro
duct is too
fa
st and
too highly pr
essurized
fo
r the Injector
Assem
b
ly.
The Spout Adapter is not
properly installed.
The Spout Adapter is not
pushed fully onto
the freezer
door spout.
The black o-
ring and/or
gasket are n
o
t
present inside the Adapter. The black o-
ring and/or
gasket in
sid
e
the
Adapter are worn. The Spout Adapter has b
een damaged.
Problem
The Injector
Assembly Drive Motor does not
operate during the normal operating functions. The Injector
Head comes off during
normal
operation. Product mix is leaking fr
om the top of the
Spout Adapter.