Flavor Burst FB 80INT-08, Manual

Page: 62 / 85

61
6. Reinstall the cap and tighten sufficiently.
Slide the Sanitizer Tank into the cabinet.
(See Figure 173.)
26252
Figure 173
7. Reconnect the sanitizer supply line to the
Sanitizer Tank. (See Figure 174.)
26248
Figure 174
Power Cord Connection and Power Up
The electrical connection for the FB 80INT are
located on the back of the modified Taylor
Panel. Once plugged in, the system can remain
on during normal operations. It does not need
to be turned off unless it is serviced or moved,
or unless it is not used for a long period of time.
ELECTRICAL HAZARD: DO NOT
HANDLE OR OPERATE IN PRESENCE OF
WATER. FAILURE TO COMPLY MAY
RESULT IN SERIOUS ELECTRICAL SHOCK
OR ELECTROCUTION.
1. Connect the power cord to the port on the
back cabinet panel.(See Figure 175.)
26222
Figure 175
2. Plug the power cord into an appropriate
outlet.
3. Activate the unit using the power-switch
next to the power cable on the back of the
Taylor cabinet. (See Figure 176.)
26223
Figure 176
4. The Keypad should confirm power-up by
sounding an audible startup tone and
lighting the LED’s on the Keypad.