Flavor Burst FB 80INT-08, Manual

Page: 77 / 85

76
TROU
BLES
HO
OTING GUID
E
POWE
RUP PROBLE
MS
Corrective Action
Turn the Power Switch to “ON”. Connect the Power Cord
to the outlet
on the
back of the
unit.
Connect the Power Cord
to the power
source outle
t.
Connect Keypad Cable
to receptacle on the
back of the
unit.
Call for service. Call for service. Call for service or replace Spigot Switch. Call for service or replace switch cab
le
(ELE 427) in the Keypad
.
Call for service. Replace the
Keypad.
Call for service to replace the microprocessor.
Probable Cause
Power Switc
h
on the back of the unit
is
turned off. Power Cord
is disconnected from outlet on
back of the
unit.
Power Cord
is disconnected from power
source outle
t.
Keypad Cable is disconn
ected from
receptacle o
n
the back o
f unit.
The power fuse in the p
o
wer entry module is
blown. The F-2 fuse is blown. The draw-handle Spigot
Switch is fa
ulty.
The Keypad switch cable is fault
y
.
If an integrat
ed switch is
used, the switch
lever is no
t
activatin
g
th
e switch.
The WATER / SYRUP
FLUSH key on the
Keypad is fa
ulty.
The Drive Motor relay on
the microprocessor
is faulty.
Problem
Unit and Keypad will not
power up.
Unit and Keypad power up, but ‘WATER / SYRUP FLUSH’ functions do not work. Unit operates ‘WATER / SYRUP FLUSH’ functions, b
u
t the Inject
or System and
pumps do not operate d
u
ring normal
operations
while drawing product.
When the unit is turned
on, the Drive Motor
starts immediately.