Flavor Burst FB 80INT-08, Manual

Page: 29 / 85

28
4. Brush and clean all exposed surfaces of the
Injector Head with detergent water, then
rinse thoroughly. Use a small brush to
ensure that the syrup orifices are clear of
any residual syrup. (See Figure 31.)
26061
Figure 31
5. When the Drive Assembly Gear Box has
soaked for at least 5 minutes, brush and
clean all exposed surfaces and openings
with detergent water and rinse thoroughly.
The Suspension Bracket may be
disassembled for a more thorough cleaning
if necessary. (See Figure 32.)
26065
Figure 32
NOTE:
UNDER NORMAL OPERATING
CONDITIONS, IT IS NOT ADVISORY TO
BRUSH OTHER AREAS INSIDE THE DRIVE
ASSEMBLY GEAR BOX. DOING SO MAY
CAUSE DAMAGE.
NOTE: DO NOT OPEN OR DISASSEMBLE
THE DRIVE ASSEMBLY GEAR BOX.
6. Place the Gear Box, Suspension Bracket,
Gear Cartridge, and Injector Head in
approved sanitizer solution and soak for at
least 1 minute. (See Figure 33.)
26066
Figure 33
7. Remove each part from the sanitizer
solution. Place the items on a sanitary tray
to air dry. (See Figure 34.)
26067
Figure 34
8. Spray the Syrup Line Manifold opening with
approved sanitizer solution. Allow it to
sanitize for at least 1 minute. (See
Figure 35.)
26078
Figure 35