Flavor Burst FB 80INT-08, Manual

Page: 70 / 85

69
Dispensing Flavor Burst
®
Product
More than one flavor can be selected for a
multi-flavored product. Simply select all the
flavors desired in the single serving and draw
the product as usual. The flavors will dispense
in one smooth motion, changing in the order
selected, resulting in layers of flavors.
If no flavoring is desired (i.e. – to draw vanilla),
simply touch the CANCEL ENTRY key to
deselect any flavor that may have been
selected. Proceed to draw product according to
the freezer manufacturer’s instructions.
1. Select the desired flavor(s) by selecting
from keys 1-8.
2. Press the Spigot Switch lever against the
draw-handle as you pull the draw-handle
down to dispense product. (See
Figure 197.)
26211
Figure 197
NOTE: WHEN YOU PULL THE DRAW-
HANDLE DOWN TO DISPENSE THE
SERVING, PRESSING THE SWITCH LEVER
AGAINST THE DRAW-HANDLE STARTS THE
FLAVOR FLOW TO THE INJECTOR HEAD.
HOLD THE SWITCH LEVER AGAINST THE
DRAW-HANDLE UNTIL YOU ARE READY TO
STOP THE PRODUCT FLOW. RELEASING
THE SWITCH LEVER BEFORE RAISING THE
DRAW-HANDLE WILL REDUCE FLAVOR
CARRYOVER TO THE NEXT SERVING.
3. Release the Spigot Switch lever as you lift
the draw-handle when the desired amount
of product is drawn. (See Figure 198.)
26212
Figure 198
NOTE:
WHEN THE SWITCH LEVER IS
RELEASED, THE SYRUP FLOW STOPS.
4. On occasion it may be desirable to sanitize
the Injector Head between servings. Simply
hold a container under the dispensing spout
and press WATER / SYRUP FLUSH. (See
Figure 199.)
26250
Figure 199