Festo SFC-LAC CO Series, Manual

Page: 29 / 328

1. System summary
1−9
Festo P.BE−SFC−LAC−CO−EN en 0708NH
Warning
There is no plausibility check to see whether the deceler
ation (braking) that is set is actually achievable. The de
celeration that can be achieved depends on your applica
tion (e. g. power and switching speed of your power sup
ply unit, work load, mounting position).
If the deceleration cannot be achieved, an error will occur
and the controller will be switched off. The work load on
the HME will continue to move due to inertia, or it will fall
if mounted in a vertical or sloping position.
·
Perform a test run to see whether the quick stop
deceleration that is set is actually achievable.
·
When doing so, take into account the diagrams in the
FCT (Measured data" page).
If the desired deceleration cannot be achieved:
·
Use stronger power units or reduce the dynamics.