Festo SFC-LAC CO Series, Manual, Page: 139 / 328

5. Commissioning
5−49
Festo P.BE−SFC−LAC−CO−EN en 0708NH
Description of 3. Error treatment
Description of faults and warnings see section 6.3
3.1 A fault is shown with SCON.B3 FAULT.
}
Positioning can no longer be undertaken.
3.2 A warning is shown with SCON.B2 WARN.
}
Positioning can still be undertaken.
3.3 Quit fault with positive edge at CCON.B3 (RESET).
}
Fault bit SCON.B3 (FAULT) or
SCON.B2 (WARN) will be reset.
}
SPOS.B2 MC will be set.
}
Drive is ready to operate.
or
3.4 Quit fault with negative edge at CCON.B0 ENABLE.
}
Fault bit SCON.B3 FAULT or
SCON.B2 WARN will be reset.
}
SPOS.B2 MC will be set.
}
Create readiness to operate again
(see examples 1, Tab.5/4 and 2, Tab.5/5)