Festo SFC-LAC CO Series, Manual

Page: 132 / 328

5. Commissioning
5−42
Festo P.BE−SFC−LAC−CO−EN en 0708NH
5.5.6 Description of the status bytes SCON, SPOS, SDIR (RSB)
Status byte 1 (SCON)
Bit Description
B0
ENABLED Drive Enabled = 0: Drive blocked, controller not active
= 1: Drive (controller) enabled
B1
OPEN Op eration En abled = 0: Stop active
= 1: Mode enabled, positioning possible
B2
WARN Warn ing = 0: Warning not applied
= 1: Warning applied
B3
FAULT Fault
= 0: No fault
= 1: There is a fault or reaction to fault active.
Fault number in diagnostic memory
B4
24VL V oltage L oad = 0: No load voltage
= 1: Load voltage applied
B5
HMI
Drive control = 0: Device control by PLC/field bus
= 1: Device control via FCT/MMI
B6
OPM1 Op erating M ode = 00: Record select (standard)
= 01: Direct mode
10 Reserved
B7
OPM2
= 10: Reserved
= 11: Reserved