Festo SFC-LAC CO Series, Manual, Page: 11 / 328

Contents and general instructions
IX
Festo P.BE−SFC−LAC−CO−EN en 0708NH
Designated use
The single field controller type SFC−LAC−... is used as a
position controller and position servo for the electric linear
module, type HME−...
This manual deals with the basic functions of the SFC−LAC and
the CANopen interface of the SFC−LAC−...−CO.
The linear module HME−... and additional components are
documented in separate operating instructions.
The SFC−LAC and the connectable modules and cables may
only be used as follows:
as designated
only in industrial applications
in faultless technical condition
in orignial condition without modification (only the con
versions or modifications described in the documentation
supplied with the product are permitted).
·
Follow the safety instructions and use all the components
and modules as described in the documentation.
·
Observe also the standards specified in the relevant
chapters, as well as national and local laws and technical
regulations.
·
Observe the maximum values of all additional compo
nents (e. g. sensors, actuators).