Festo Compact Performance CP-FB6-E, Manual

Page: 6 / 77

Designated use
The CP field bus node CP-FB6-E documented in this
manual is designated exclusively for use as a slave on
the INTERBUS. Festo CP modules can be connected
to the field bus node CP-FB6-E. The specified limit
values for pressures, temperatures, electrical data, mo-
ments, etc. must be observed when additional commer-
cially-available components such as sensors and actua-
tors are connected.
Please comply also with national and local safety laws
and regulations.
Target group
This manual is directed exclusively at technicians who
are trained in control and automation technology and
who have experience in installing, commissioning, pro-
gramming and diagnosing INTERBUS slaves.
Information on this manual
This manual contains specific information on the instal-
lation, commissioning, programming and diagnosis of
the CP field bus node 6 for INTERBUS.
Information on further CP modules can be found in the
relevant manual. This is summarized in Fig. 0/1.
Contents and general safety instructions
CP FB6-E 9809c
V