Festo Compact Performance CP-FB6-E, Manual

Page: 21 / 77

1.4 Connection to the remote bus
1.4.1 Floating remote bus
The field bus node is prepared for floating operation on
the remote bus. Check the valid standards and guide-
lines for your application to see if a floating structure is
suited to your requirements. Further information on in-
stalling an INTERBUS system can be found in the IN-
TERBUS installation manual. Obtainable from:
Phoenix Contact GmbH & Co.
Postfach 1341
32 819 Blomberg, Germany
Article: IBS SYS INST UM
Order no. : 27 54 28 6
Connecting to optical-fibre waveguide
Connection to the bus can also be made with a optical-
fibre waveguide. Contact connectors offer a ready-to-
use data transfer system "ZYLIN RS485" for this pur-
pose. This can be connected to the valve terminal. The
ZYLIN RS485 system is self-supplying and consists of
two pin-compatible 9-pin IP 67 round plugs, integrated
optoelectronics and plastic optical-fibre waveguide.
1. Installation
1-10
CP FB6-E 9809c