Festo Compact Performance CP-FB6-E, Manual

Page: 55 / 77

PLEASE NOTE
In order to correct the byte swap, you need only
assign the appropriate I/O address to each byte.
Individual I/O assignment at bit level is only necess-
ary in special cases.
The following dialogue window shows the entries re-
quired for swapping the assignment of the high byte
and the low byte (example: byte swap for "Standard
mode").
Fig. 2/11: Modifying the I/O assignment – example for "Standard mode"
2. Commissioning
2-26
CP FB6-E 9809c