18
Installing the Mobile Camera System
To install the flush-mount camera, follow these steps:
Preparing to Install the Flush-Mount Camera
1. Open the camera mounting hardware kit, which includes:
• Four self-tapping screws
•
Four machine screws with matching lock washers, flat wash
-
ers, and nuts
•
Waterproofing tape
2. Decide whether you will be mounting the camera to the vehicle
with the included bracket or flush to a vehicle surface.
Marking and Drilling the Mounting Holes for the
Flush-Mount Camera
AIRBAG DEPLOYMENT
Do not install equipment or route wiring in the deployment path
of an airbag.
Failure to observe this warning will reduce the effectiveness of
the airbag or potentially dislodge the equipment, causing serious
injury to you or others.
SEAT REMOVAL PRECAUTION
If a vehicle seat is temporarily removed, verify with the vehicle
manufacturer if the seat needs to be recalibrated for proper airbag
deployment.
Failure to heed this warning could result in death or serious injury.
LOCATING OPERATORS CONTROLS
Locate the camera(s), monitor, keyboard, control box, and digital
video recorder (as applicable) so the VEHICLE and SYSTEM can
be operated safely under all driving conditions.
Failure to heed this caution could result in driver distraction or
driver error while operating the vehicle.
