9
Installing the Mobile Camera System
To install the rear-view camera, follow these steps:
Preparing to install the Rear-View Camera
1. Open the camera mounting hardware kit, which has:
• four self-tapping screws
•
four machine screws with matching lock washers, flat washers,
and nuts
• four plastic screw insulators
• an insulating pad
• an Allen wrench
•
waterproofing tape
2. Use the Allen wrench to remove the sun shield and camera from
the mounting bracket so that the bracket can be used as a tem-
plate for marking drill-hole locations (Figure 1).
290A6046B
SUN SHIELD
MOUNTING BRACKET
INSULATING
PAD
2 TO 4 SELF-TAPPING SCREWS WITH
PLASTIC INSULATORS, LOCK WASHERS,
FLAT WASHERS AND NUTS
VEHICLE
CHASSIS
FLAT WASHER
LOCK WASHER
NUT
Figure 1. Rear-view camera installation
(CAMCCD-REARNTSC/CAMCCD-REARPAL)
