Version 6
Operating instructions
CCS Silver
Firmware 2021-01-14
Page:
28
of:
72
FAUDI Aviation GmbH, Scharnhorststraße 7 B, D-35260 Stadtallendorf
Manual_CCS_silver_Eng_
operation_version6.docx
3.2.4.3.4 Flow Rate Sensor
Select Flow Rate Sensor menu to set up flow sensor.
You are asked to select:
Signal:
•
N/A
•
Pulse
(most common type)
•
0..20 mA
•
4..20 mA
For a change click on the < > Button.
If you use an analog sensor, it is very important not to mix up the ranges 0..20mA and
4..20mA.
Otherwise the system will work with invalid flow values or system will detect a
sensor error or a wire break!
Please refer to original documentation of sensors to check
for correct settings.
