Version 6
Operating instructions
CCS Silver
Firmware 2021-01-14
Page:
14
of:
72
FAUDI Aviation GmbH, Scharnhorststraße 7 B, D-35260 Stadtallendorf
Manual_CCS_silver_Eng_
operation_version6.docx
Note the original settings e.g. by screenshot and carefully safe the original information to set
back your computer when finished with the settings on the CCS.
Connect your computer to the CCS using an Ethernet cable.
3.1.2 Connection via Wi-Fi
When you want to access to the CCS with a mobile device like a smartphone or a tablet PC
or a Laptop using Wi-Fi, you need an
access point or wireless router
.
The most routers support the Dynamic Host Configuration Protocol (DHCP). When you use a
router wi
th this feature, you don’t need to configure the IP Address of your smartphone /
tablet / laptop manually, referring to the last chapter.
In the following steps, we show you how to configure a router. The screenshots show you the
setup of the Teltonika® RUT955 router.
1. Connect the CCS to the router via an Ethernet cable
2. Connect your computer to the router (Ethernet or Wi-fi) the following pages show
a configuration via Wi-fi using Windows
3. Open the adapter settings of your computer
4. Set the IP settings to automatic (DHCP) referring to the pictures
5. Open the configuration of your router by entering its IP address to your web
browser. It is printed to the device
6. Change access password to router configuration and note
7. Set the IPv4 Address of the router to from default to
192.168.10.1
8. Set the Subnet mask to 255.255.255.0 or set the Prefix length to
24
(depending
on the setup of your router)
9. Your router might disconnect because you changed its IP address. Reconnect by
typing
192.168.10.1
to your web browser
10. Open the DHCP Settings of your router
11. Set the IP Address range to e.g. 192.168.10
.100
to 192.168.10
.199
(The CCS
uses a static IP Address which is by default
192.168.10.231
) The range must not
contain the IP address of the CCS
12. Set a Wi-Fi passcode. It
’s recommended to use
WPA2
or a better encryption
13. Rename the name (SSID) of the Wi-Fi. It is highly recommended to enter a
number/code of the vehicle where the CCS is installed. Otherwise it will be difficult
to differentiate between the devices if multiple CCS are installed at an airfield.
14. Now take your smartphone / tablet / laptop and access to the Wi-Fi of the router,
enter the wi-fi passcode and make sure you are connected to the network.
Note that everybody who knows this passcode gets access to the CCS.
For
additional security we recommend setting another Wi-Fi code than the User and
Administrator PIN of the CCS.
