Version 6
Operating instructions
CCS Silver
Firmware 2021-01-14
Page:
24
of:
72
FAUDI Aviation GmbH, Scharnhorststraße 7 B, D-35260 Stadtallendorf
Manual_CCS_silver_Eng_
operation_version6.docx
3.2.4.2 Handling of the installer
In the headline of the screen, there are two navigation buttons. Press the Next >> button to
enter next menu step or go back to previous menu with the << Back button. In the installer
some configuration dialogs get opened where you must enter some values. You can use the
blue keypad on the screen
or the buttons of the NUM Block off your computer keyboard
as well.
Every change you make in the installer will be applied
immediately
. Not at Finishing the
installer. At the end of the installer, a reset will be applied to delete cable break errors which
could come from configuration routine.
3.2.4.3 Menu structure of the Installer
3.2.4.3.1 Date and Time settings
First menu is
Date and Time. Click on
change
button of Day, Month, Year, Hour or
Minute, or press the zero button to Set the Second section to set
the Seconds to 00.
If you press a
change
button, you will enter the appropriate menu. This looks like the
following:
For Setting the year, please only type in the last two digits e.g.
19
for 20
19
. The latest date
supported by the system will be in year 2037. For Setting day or month type in the last one or
two digits and press Enter
↲
. You will go back to the Date and Time Screen. If the chosen
value is 0 or if the value is out of the specified range, a press of Enter
↲
won’t be accepted.
For setting hours or minutes press on the appropriate change button. The menu for Hour or
Minutes will open. Please enter a one- or two-digit value and press Enter
↲
. If the value is out
of range, the Enter
↲
won’t be accepted.
If you finish the Date and Time settings, click the Next >> button.
3.2.4.3.2 Change PIN
Next menu is to change PIN. Click on change button of Administrator or User to set new PIN
numbers:
