Fastec IL3, Operator'S Manual

Page: 93 / 107

IL3 User’s Guide
11S-3002B
page 85
Appendix D: Power and I/O Connections
Power Connections For the IL3
(View from Solder cup
side of connector)
Pin Signal
1 +12 to 24VDC
2 +12 to 24VDC
3 No Connection
4 Ground
5 Ground
I/O Connections: Sync and Trigger
(View from Solder cup
side of connector)
Pin Signal
1 Ground
2 Analog Reserved
3 LVTTL Sync Out
4 LVTTL Trigger Out
5 LVTTL
Arm Out
6 LVTTL Arm In
7 LVTTL Trigger In
8 LVTTL Sync In
The IL3 is shipped with a Sync I/O cable for connecting external Trigger, Sync Out, and Sync In signals.
The cable has a LEMO connector for the IL3 end and BNC connectors for the three signals.
1
3
2
4
5
Use Lemo 1B.305 compatible plug
(FGG.305.CLAD.42.NZ Pictured here)
Refer to //http:www.lemo.com
1
3
2
5
6
7
5
8
4
Use Lemo 1B.308 compatible plug
Refer to //http:www.lemo.com
Table 8-4: Power Pin Out
Table 8-5: I/O Connector Pin Out