IL3 User’s Guide
11S-3002B
page 97
Field
Size
Description
Manufacturer’s name
32
“FASTEC”.
Model name
32
“TS3100SC8064” for example.
Serial number
16
“0.0.122.A3” for example.
Application version
32
“1.5.8” for example.
Camera name
16
“FastecA4-7A” for example.
Ethernet MAC address
6
The MAC address of the camera.
Bit selection
1
0:Low8, 1:Mid8, 2:High8, 3:10Bits
Sensor gain
1
The gain used by the sensor (analog gain).
FPGA version
4
FPGA version information.
ROI x-offset
2
Left side of the ROI window.
ROI y-offset
2
Top side of the ROI window.
ROI width
2
Width of the ROI window.
ROI height
2
Height of the ROI window.
Frames per second
4
Number of frames per second.
Shutter speed
4
Exposure time in microseconds.
Sensor type
4
Type of sensor used, “L13C” for example.
GPS location
64
GPS location information.
Frame count
4
Total number of frames captured.
Frame size
4
Size of the frames in quadwords.
First frame
4
Frame number of the first frame in the capture buffer.
Trigger frame
4
Frame number of the trigger frame in the capture buffer.
Trigger time seconds
4
Linux time of the trigger event.
Trigger time nanoseconds
4
Nanoseconds of trigger event from last second.
Start of video
4
Start of capture buffer, in quadwords.
As-shot neutral
12
The AsShotNeutral value.
Matrix coefficients
36
IPM matrix coefficients.
White balance gains
12
IPM white balance gain settings.
Multislope settings
2
LUPA 1300-2 multislope settings.
Trigger settings
1
SyncIn settings
1
SyncOut settings
1
Brightness
1
0-255 centered around 128.
Contrast
1
0-255 centered around 128.
Gamma
1
0-250 centered around 100.
RGB gain settings
3
Red, green, blue gain settings.
FPN settings
1
Off, sensor or pixel correction.
Correction table offset
4
Offset to the correction table.
Correction table length
4
Size of the correction table, in quadwords.
Table 8-8: CAP File Format
