2.
51
(MT13 - En 2015)
2
C
HOOSING A FAVORITE MELODY
C
HOOSING A FAVORITE MELODY
C
HOOSING A FAVORITE MELODY
S
ELECTING THE DURATION OF RINGERS
(
FROM
1
TO
8
RINGS
)
C
HOOSING A FAVORITE MELODY
C
HOOSING THE
V
OLUME OF
R
INGTONES
+
+
+
+
+
+
PRESS REPEATEDLY
PRESS REPEATEDLY
PRESS REPEATEDLY
PRESS REPEATEDLY
PRESS REPEATEDLY
PRESS REPEATEDLY
P
ROGRAMMING
T
YPE
, D
URATION
AND
V
OLUME RINGERS
P
ROGRAMMING RINGTONE
I
NTERCOMMUNICATING CALL
,
FROM THE OTHER USER AND
FLOOR CALL
P
ROGRAMMING RINGTONE
C
ALL FROM THE OTHER USER
P
ROGRAMMING THE NUMBER
OF RINGERS
P
ROGRAMMING RINGTONE
F
LOOR CALL
P
ROGRAMMING THE
V
OLUME
OF RINGERS
(
AT LEAST
4
SECONDS
)
(
AT LEAST
4
SECONDS
)
(
AT LEAST
4
SECONDS
)
(
AT LEAST
4
SECONDS
)
(
AT LEAST
4
SECONDS
)
(
AT LEAST
4
SECONDS
)
ringtone
door
station
ringtone
intercom
municating
ringtone
from
other
user
num
ber
of rings
ringtone
from
floor
call
ringtone
door
station
TU
-
TU
-
TU
TU
-
TU
-
TU
TU
-
TU
-
TU
TU
-
TU
-
TU
TU
-
TU
-
TU
TU
-
TU
-
TU
R
INGTONE FROM
D
OOR
S
TATION
C
ALL
R
INGTONE
I
NTERCOMMUNICANTING
C
ALL
R
INGER CALL FROM ANOTHER USER
N
UMBER OF
R
INGERS
R
INGER
F
LOOR
C
ALL
V
OLUME OF
R
INGERS
E
ND OF
PROGRAMMING
OPERATION
Call from external station.
When a call is made from the external station, the intercom generates an
acoustic tone and stays ON for about 30 seconds. Pick up the handset
to start conversation with the external station for about 90 seconds and
press button "
" to open the door.
Connection with one or more external stations without receiving
the call.
Picking-up the handset when the system in stand-by and no conversation
in progress you will hear the tone of system ready.
By pressing the button "
" you will be connected with the door station
or, if more than one door station is present in the system, with the door
station from which you received the last call; in this case if the buttons
and
have been programmed with the addresses of the door stations
present in the system it would be possible to communicate with them by
pressing the associated buttons. If picking up the handset is heard a
busy tone, wait until the system becomes free.
Making or receiving a call from another user.
When the installation is in stand-by, you can make a call to another user.
You must have stored the address of the desired user’s in the button
or
.
To make the call, pick up the handset, wait for the free tone and press
button. You will hear the call tone and the intercom of the called user will
ring with a ring different from calls from external stations or intercom calls
from the same apartment.
If the called user answers within 30 seconds, a 90-second conversation
starts, otherwise the system goes back to free.
The internal conversation in progress will be automatically interrupted in
case of call from external station to any other user.
If picking up the handset is heard a busy tone, wait until the system
becomes free.
Making or receiving an intercom call in your apartment.
When the system is at rest an intercom call between two devices located
in the same apartment can be made (internal codes from 000 to 007) by
pressing the buttons previously programmed with the appropriate internal
addresses (000, 001, etc..). Please, refer to example “b” on page 2.48.
To make the intercom call, pick up the handset, wait for the free tone and
press proper button. After pressing the button you will get a calling tone
on the loudspeaker, while the intercom of the called user rings with the
programmed melody.
If the called user answers within 30 seconds, a 90-second conversation
starts, otherwise the system goes back to free.
INTERNAL STATIONS
Adjustments of the intercom ringers
0
1
2
3
0
1
2
3
Tone table
Tone of pressure of button .
Tone of pressure of button
.
Acknowledge tone.
Busy.
0
1
2
3
Tone.
Programming.
Tone of system ready.
Calling.
Dissuasion.
End conversation.
0
1
2
3
0
1
2
3
0
1
2
3
0
1
2
3
The internal conversation in progress
will be automatically interrupted in
case of call from external station to
any other user.
