Farfisa EH9262CW series, Technical Manual

Page: 19 / 208

2.
9
(MT13 - En 2015)
2
Back Supplementary
addresses
Supplementary
addresses
Room
Forwarding
A1
Forwarding
A1
Address
INTERNAL STATIONS
System - Here the user can set the specific parameters of the system which allow the proper functioning videointercom system.
Supplementary addresses. Addresses
of other users to which the device must
answer. Beside the additional user address,
it is required to set the correctly room
number.
Address. Enter the user address
corresponding to that memorized in the
external stations and the door keeper
exchanger. Numbers from 001 to 200.
Room. Address that uniquely identifies all
the devices installed in the same apartment
(with the same user address).
Numbers from 000 (main device) to 009
(secondary devices).
Forwarding A1. Enables or disables
redialing floor call (doorbell) to other devices
installed in the same apartment. It is also
possible to enable advanced functions
(contact the technical support service of Aci
Farfisa).
Back - Return to previous page.
Back Actuations
Favourite
buttons
Favourite
buttons
Entrances
Installation
wizard
Installation
wizard
Intercommunicating
Back
Show
settings
Show
settings
Advanced
Default
System
Intercommunicating. Enter the addresses
and the names of the devices with which
the videointercom should communicate. The
names can be modified at a later time by the
user by accessing the “Settings” menu.
Entrances. Enter the addresses and the
names of the entrances to which the
videointercom should connect. The names
can be modified at a later time by the user by
accessing the “Settings” menu.
Actuations. Enter the addresses and the
names of the devices that can be
activated by videointercom. The names can
be modified at a later time by the user by
accessing the “Settings” menu.
Installation wizard. See page 2.6.
Favourite buttons. Select the key to be
programmed and then the function to assign.
Back - Return to previous page.
System. Here the user can set the following
addresses: user, room, supplementary and
forwarding A1.
Default. It enables resetting the factory
settings of the device; if there are any
intercommunicating devices, external door
stations and actuators programmed, such
entries will not be deleted.
Advanced Settings. Procedures and
information protected by password that can
only be accesses by Aci Farfisa technical
service.
Show settings - List of all actual settings.
Back - Return to previous page.