3.
40
(MT13 - En 2015)
Code 05 -
Loading names from Personal Computer
DOOR STATIONS
DIGITAL PUSH-BUTTON PANEL
"Dialling"
or
"Search"
OPERATION
Check that all connections are correct. Connect
the power supply unit to the mains; the displays
shows the software version of the push-button
panel for 3 seconds followed by “ACI FARFISA
/ press < > (< > in alternate mode).
Dial the user number, check that the number is
correct on the display “dialling / ----" and
press
to make the call. The tone and the text
“calling / ----” confirm that the call has been
made.
In case of error press (only before sending
the call) and dial the correct to number.
If the number exists you will hear the
confirmation tone; if not, you will hear the busy
tone and the display will show “busy / “.
You can select the internal station from the
names in the list. Press
or
to search for
the internal station and press
to send the
call.
The called station will ring only once; but, if in
this phase, press
another time the station
rings again. If press the call is terminated
and the system is ready for a new call.
The called user picks up the handset (or press
for Zhero, myLogic and Echos series)
enables the conversation with the external
station for 90 seconds. The display shows
“connection /---”. The text on the display starts
flashing 10 seconds before conversation ends.
To continue conversation for additional 90
seconds press
again.
Press the
button to release the door lock.
Door lock activation time is 3 seconds (or 6
seconds).
Replace the handset (or press
for Zhero,
myLogic and Echos series) or press on the
door station to restore the idle state.
Numbers that are not sent or deleted go off
after 25 seconds.
In installations with 2 or more digital push-
button panels, when a call is made from one
push-button panel, the other push-button panels
are deactivated and their display shows “busy
/ ”. Wait until the line is free to make the call.
Door lock opening
The door lock can be opened from the push-button panel,
including in “busy” mode, by dialling one of the 16 4-digit
codes you have entered.
Door lock activation
- Dial 00
- Press
; the display shows “Password / “
- Dial the personal access code within 10 seconds; each
digit is visualised with * instead of .
- Press
to release the door lock; you hear the
confirmation tone and the push-button panel returns to
the current system operation mode (free or busy).
Indicates an error during the programming phase or that the
conversation time is near to expire.
End conversation tone
Tone table
Indicates that the user is busy or not existing
It indicates that the operation is correct (call, password
entering, door opening in conversation)
Busy
Acknowledge
