3.
36
(MT13 - En 2015)
DOOR STATIONS
DIGITAL PUSH-BUTTON PANEL
Function of buttons when entering or
modifying a name
Hold this button pressed to scroll the list of
existing names
Hold this button pressed to move the cursor
to the name characters
Hold this button pressed to scroll down the
list of characters
Hold this button pressed to scroll up the list
of characters
When searching for characters, the display
shows uppercase letters, low-case letters,
numbers, characters . <> and space in a
sequence.
Entry of names
Move the jumper J1 from 2-3 to 1-2.
Enter the code 01 and press
; the display
shows the first name. The display is empty if
no codes are programmed.
Press
or
to select the character for the
first cell; press to go to the second cell;
press
or
to select the character for the
second cell; continue until you have entered
the complete name with code. Press after
you have entered the number in the last cell
on bottom right; the display shows “STORE
USER / YES < > NO”; press
to confirm;
press
to modify the name.
If confirmed, the display shows the second
name. The display is empty if no names are
programmed.
Once you have confirmed the last name,
bring the jumper J1 back to the original
position (from 1-2 to 2-3). The display shows
“waiting” and an automatic status bar. Normal
operation is restored after a few seconds
and the display shows the initial text (see
“Operation” on page 3.40)
Notes. Once you have entered 250 names the
display shows “waiting” and an automatic status
bar. After a few seconds the display shows
“Programming / type: “ and you can continue
with programming or exit by moving the jumper
J1 back to 2-3.
You can enter 2 or more names with the same
call number (i.e. different family names in the
same apartment).
Modification or correction of names
Move the jumper J1 from 2-3 to 1-2.
Enter the code 01 and press
; the display
shows the first name.
Press
to search for the name you want to
modify; (hold the button pressed for quick
searching).
Press to go to the character you want to
modify.
Select the character with
(forward)
(backward).
Repeat the operation until you have com-
pleted the name modification.
Once you have completed the modification,
hold
pressed until the display shows
“STORE USER / YES < > NO”. Press
to
confirm or
to modify the name again.
Enter a space to delete a letter.
Addition of 1 or more names to the list
To add a new name to existing list you must:
move the jumper J1 from 2-3 to 1-2.
enter the code 01 and press
; the display
shows the first name.
press
to scroll the list; the display is empty
after the last name (hold the button pressed
for quick searching).
to enter a new name follow the operations
described in “Entry of names”. If confirmed,
the name is placed in the list in alphabetical
order.
Deletion of name
Move the jumper J1 from 2-3 to 1-2.
Enter the code 01 and press
; the display
shows the first name.
Press
to search for the name you want to
delete; (hold the button pressed for quick
searching).
Press to go to the last cell (bottom right);
enter a space to delete the existing number.
Press again; the display shows “DELETE
USER / YES < > NO”. Press
to confirm or
to go back to the name.
Press
to confirm or
to go back to the
name.
The next name is displayed after you have
deleted the name.
Language selection (code 02)
You can choose the language from 6 different
options (Italian, English, French, German,
Spanish and Portuguese) in operation mode:
Move the jumper J1 from 2-3 to 1-2.
Enter the code 02 and press
; the display
shows “Italiano” in case of first programming
or the programmed language.
Press
or
to select the language.
Press
to confirm; the display shows
“Programming / type: “.
Continue by entering the code of a new pro-
gramming or exit by moving the jumper J1
back to 2-3.
System programming (code 03)
You can change or activate the functions of the
push-button panel (see table 3.10).
Before programming you must:
Move the jumper J1 from 2-3 to 1-2.
Enter the code 03 and press
; the display
shows “bit 0 = 0 / 0 < > 1” in case of first
programming or “bit 0 = 1 / 0 < > 1” if changed
in the previous programming.
Press
to select 1 or
to select 0.
Press
to confirm and go to the next code
(see code table with descriptions).
Once you have confirmed the value of the last
code (bit 7), the display shows “Program-
ming / type: “
Continue by entering the code of a new pro-
gramming or exit by moving the jumper J1
back to 2-3.
Personalisation of display initial text (code
04)
You can modify the text shown on the display
during normal operation or idle state. You must
program bit 5 to display the text (see “system
programming”).
To insert the personalized text you must:
Move the jumper J1 from 2-3 to 1-2.
Enter the code 04 and press
; the display
shows “DUO System“, in case of first pro-
gramming, or the text you want to replace.
For information on how to enter the charac-
ters see “entry of names”.
Press
to confirm; the display shows “Pro-
gramming / type: “ .
Table 3.10 - Table of system programming codes (code 03)
Programming
Function description
Default
Value entered with buttons
code
value
= 0
= 1
bit 0
door lock activation time
3 sec.
3 seconds
6 seconds
bit 1
activation upon call from internal station (1)
YES
NO
YES
bit 2
door lock activation with
(2)
NO
NO
YES
bit 3
deactivation of tone generator on the external door station
NO
NO
YES
bit 4
activation of personalised initial screen (3)
NO
NO
YES
bit 5
deactivation of ACI FARFISA and activation of personalised text
NO
NO
YES
bit 6
EC-EM terminals for additional camera switching
NO
NO
YES
bit 7
activation time of the EC-EM terminals for supplementary lock
3 sec.
3 seconds
6 seconds
(1) This function allows the internal stations to press the
button and pick up the handset (or pressing
in Zhero, Echos, myLogic models),
start a conversation with the external station (in case of more external stations in parallel the connection is established with the last calling door
station) and activate the door lock by pressing the button
.
(2) This functions allows for quicker door lock activation by pressing
rather than dialling the code 00+
. For example: press
+ password
+
.
(3) You can alternate “ACI FARFISA” with the personalised text (see “personalisation of display initial text”).