Farfisa EH9262CW series Technical Manual Download Page 27

Page: 27 / 208

(MT13 - En 2015)

menu is displayed: select “cancel” to move back to the “Room” page
– select “save” to exit and store the new room number – select “don’t
save” to exit without saving it.

- Ringing Melody - it is possible to assign to any user a personal
ringing melody, to make this programming it is necessary: – move the
cursor to “Ringing Melody” –
press OK; the list of available
ringing melodies are displayed
(in green the present assigned
ringing melody). Use buttons

to scroll the list and hear

the melody; press OK to select
the desired one.

To insert other user names repeat all the above operations.
If, in the contacts list, it is necessary to store 2 users with the same
address (eg. wife and husband; apartment and professional office, etc.)
it is sufficient to create 2 users with different names but the same
address.

Modify a name or address.
To modify the data of a user it is sufficient, in the “contacts” menu, select
the name and press OK; the following list will be displayed: Label,
Address, Room, Ringing Melody, Delete; select the requested item and
press OK; proceed as indicated in the chapter “insert name and
address of a user”.

Cancel a name and address from the contacts list.
To delete a user from the list it is necessary to select the name and press
OK; using buttons

select “Delete” and press OK; the “save” menu

is displayed: select “cancel” to exit without erasing the name or select
“confirm” to erase it than press OK. Press

one time to go back to the

previous page or several times to exit the programming mode.

Sorting
To change the order of the names in the contacts list it is necessary,
once in the menu “contacts”, select “Sorting” and press OK; select the
name you want to move and press OK – with the buttons

move the

name up or down in the list until you reach the desired position and press
OK to confirm. Press

to go back to the previous page.

Audio

It allows to chose the sound of
door bell, the volume and period
for all the ringing melodies and
for the tones of pressed keys. In
the settings menu select “Audio”
and press OK; the following menu
will be displayed: Door Bell (only
for “floor call” – A1 terminal), Ring
tone period, Key tone, Ring tone level, Tone level.

- Door bell – select “Door bell” and press OK; with buttons

select

the desired bell sound and press to confirm and exit.

- Ring tone period – select “Ring tone period” and press OK; with

buttons

increase or decrease ringing melody repetition period

(from 0 to 255 seconds) and press OK; the “save” menu is displayed:
select “Cancel” to go back to the previous page – select “Save” to
save and exit – select ”don’t save” to exit without saving the data.

- Key tone – it allows to activate (enable) or deactivate (disable) the

tone while pressing the buttons of the videointercom. Select “Key
tone” and press OK; with buttons

select “enabled” or “disabled”

and press OK to confirm; press

to go back to the previous page.

- Ring tone level – it allows to increase (

) or decrease (

) the

volume of all the ringing melodies of the videointercoms. Select “Ring
tone level” and press OK; on the right side of the screen a vertical
graphic bar will be displayed and the present level will be heard. With

buttons

select the desired level of volume and press OK to

confirm and go back to the previous page.

- Tone level – it allows to increase (

) or decrease (

) the volume of

all the tones of the videointercoms. Select “Tone level” and press OK;
on the right side of the screen a vertical graphic bar will be displayed
and the present level will be heard. With buttons

select the

desired level of tones and press OK to confirm and go back to the
previous page.

System – Move the cursor to
“System” and press OK; the
main settings menu of the
videointercom will be displayed
with the following functions:
Address, Room, Additional
address, Remote program-
ming, A1 forward.

- User Address (addresses from 1 to 200)

- Move the cursor to “Address” – press OK;
the previously programmed address will
be shown (100 from the factory) – keep
pressed the button

to increase or

decrease the number of the address –
once displayed the requested address
press OK; the “save” menu is
displayed: select “cancel” to
move back to the address
page – select “save” to exit
and store the new address –
select “don’t save” to exit
without saving it.

- Room number (from 0 to 7)

- Move the cursor to “Room” – press OK;
the previously room number will be shown
(0 from the factory) – keep pressed the
button or

to increase or decrease the

number of the room – once displayed the
requested room number press OK; the
“save” menu is displayed:
select “cancel” to move back
to the room number page –
select “save” to exit and store
the new room number – select
“don’t save” to exit without
saving it.

- Secondary addresses

You can set the videointercom so that it answers the calls sent to other
users (secondary addresses); for example, the house of a professional
and his professional office, or parents’ apartment and sons’ apartment.
In this way the videointercom of an apartment can operate as a
videointercom, either main or secondary, of another apartment. It is
important to remember that, in case of a videointercom with alternative
address, the videointercom operates as a videointercom of its own
apartment, but also as videointercom of the alternative apartment so
that it must respect also the rules and programming operations of the
latter.
Example. If the room number 2 is already used in the alternative
apartment, the alternative videointercom cannot be programmed
with room number 2. Of course, it can be room number 2 of its own
apartment, if available. If there is a main videointercom in the alternative
apartment, the alternative videointercom cannot be programmed as
main videointercom, it can be the main videointercom for its own
apartment if requested.

To program the “secondary address” function you must proceed as
indicated below:
– move the cursor to “secondary addresses” – press OK; 10 empty
labels will be displayed if no one has been previously programmed –

D o o r b e l l

D o o r b e l l
R i n g t o n e p e r i o d

R i n g t o n e p e r i o d
K e y t o n e

K e y t o n e
R i n g t o n e l e v e l

R i n g t o n e l e v e l
To n e l e v e l

To n e l e v e l

A u d i o

D i n D o n

D i n D o n
S c a l a
P i r i p i r i p i
T i r i t i r i t i
Tu r k e y

R i n g t o n e

A d d r e s s
R o o m
A d d i t i o n a l a d d r e s s

A d d i t i o n a l a d d r e s s
R e m o t e p r o g r a m .