FANOX SIL-D00, User Manual, Page: 95 / 226

www.fanox.com Rev.06 95/226
6.2 Dry heat IEC 60068-2-2 Dry Heat Operation Bb, +70ºC, 72h
Dry Heat transport & Storage Bd, +85ºC, 72h
6.3 Change of temperature IEC 60068-2-14 Change of Temperature Nb, Upper temp
+70ºC, Lower temp -25ºC, 5 cycles, Exposure
time 3h, Transfer time 2 min.
6.4 Damp heat IEC 60068-2-30 Damp Heat Cyclic Db, Upper temp +40ºC,
Humidity 93%, 2 cycles. Relay energized
IEC 60068-2-78 Damp Heat Steady State Test Cab, Upper
temp +40ºC, Humidity 85%, 2 days. Relay not
energized
7. Mechanical requirements IEC 60255-27
7.1. Vibration IEC 60255-21-1
IEC 60068-2-6
Vibration response, Class 1, 10Hz to 59Hz,
0,035mm and 59Hz to 150Hz, 0.5g
n
Vibration
endurance, Class 1, 10Hz to 150Hz, 1g
n
7.2. Shock IEC 60255-21-2
IEC 60068-21-2
Shock Response, Class 1, 5g
n
, Shock
Withstands, Class 1, 15g
n
7.3. Bump IEC 60255-21-2
IEC 60068-21-2
Bump, Class 1, 10g
n
7.4. Seismic IEC 60255-21-3
IEC 60068-21-3
Single Axis Sine Sweep, Class 1, X Axis: 1 to
9Hz, 3.5mm and 9 to 35Hz, 1g
n
; Y Axis: 1 to
9Hz, 1.5mm and 9 to 35Hz, 0.5g
n
8. Electrical environmental
requirements
8.1. CT Input continuous
overload IEC 60255-27 3xIn without damage for continuous operation
8.2. CT Input short time
overload IEC 60255-27 70xIn without damage for 1s short time
overloading
8.3. VT Input continuous
overload IEC 60255-27 Declared on manual, without damage for
continuous operation
8.4. VT Input short time
overload IEC 60255-27 Declared on manual, without damage for 10s
short time overloading
9. Enclosure protection
IEC 60255-27
IEC 60529 IP-54
Quality Management System ISO 9001:2008