FANOX SIL-D00, User Manual, Page: 199 / 226

www.fanox.com Rev.06 199/226
QUICK REFERENCE FOR DNP3.0 LEVEL 2 FUNCTION CODES & QUALIFIERS
Function Codes
1 Read
2 Write
3 Select
4 Operate
5 Direct Operate
6 Direct Operate-No ACK
13 Cold Start
14 Warm Start
20 Enable Unsol. Messages
21 Disable Unsol. Messages
23 Delay Measurement
129 Response
130 Unsolicited Message
7 6 5 4 3 2 1 0
Index Size Qualifier Code
Index Size
0- No Index, Packed
1- 1 byte Index
2- 2 byte Index
3- 4 byte Index
4- 1 byte Object Size
5- 2 byte Object Size
6- 4 byte Object Size
Qualifier Code
0- 8-Bit Start and Stop Indices
1- 16-Bit Start and Stop Indices
2- 32-Bit Start and Stop Indices
3- 8-Bit Absolute address Ident.
4- 16-Bit Absolute address Ident.
5- 32-Bit Absolute address Ident.
6- No Range Field (all)
7- 8-Bit Quantity
8- 16-Bit Quantity
9- 32-Bit Quantity
11-(0xB) Variable array
FILL OUT THE FOLLOWING ITEMS FOR SLAVE DEVICES ONLY:
Reports Binary Input Change Events when
no specific variation requested:

Never

Only time-tagged

Only non-time-tagged

Configurable to send both, one or
the
other (attach explanation)
Reports time-tagged Binary Input Change
Events when no specific variation requested:

Never

Binary Input Change With Time

Binary Input Change With Relative Time

Configurable (attach explanation)
Sends Unsolicited Responses:

Never

Configurable

Only certain objects (Class 1)

Sometimes (attach explanation)

ENABLE/DISABLE UNSOLICITED
Function codes supported
Sends Static Data in Unsolicited Responses:

Never

When Device Restarts

When Status Flags Change
No other options are permitted.
Default Counter Object/Variation:

No Counters Reported

Configurable (attach explanation)

Default Object ____________
Default Variation ____________

Point-by-point list attached
Counters Roll Over at:

No Counters Reported

Configurable (attach explanation)

16 Bits

32 Bits

Other Value _____________

Point-by-point list attached
Sends Multi-Fragment Responses:


Yes

No