FANOX SIL-D00, User Manual, Page: 154 / 226

www.fanox.com Rev.06 154/226
7.6.15. Counters Menu
The first line of menus can be accessed from the standby mode screen by pressing the “OK” key. Use the “▲” and “▼” keys to move the cursor through
the different screens until it is positioned over the "COUNTERS" screen. Press "OK" and use the “▲” and “▼” keys to view the different counters. The
information displayed below the counter name is its value.
The password must be entered before attempting to change a counter for the first time. Counter changes are allowed once the password has been
entered, until the standby mode screen is returned to automatically or manually. The system returns automatically to the standby mode screen if no key
is pressed for five minutes.
The factory setting password for the equipment is 5555. The password can be changed using the SICom program.
The keys ▲, ▼, ◄ and ► are used to enter the password. ▲ and ▼ are used to introduce a value or a character, and the ◄ and ► keys are used to
move from one character to another. If it is necessary to change one of the password characters or numbers due to an error, press "C" to delete it.
Press "OK” to validate the password.
↑
COUNTERS
↓
C
SIL-D000C1A12AA
0.00 0.00 0.00 0.00
OK
Openings Number
0
C
↑
COUNTERS
↓
▲▼
Accumulated Amps
0 k(A2)
C
▲▼
Reclosing Numbers
0
C
7.6.16. Commands Menu
The first line of menus can be accessed from the standby mode screen by pressing the “OK” key. Use the “▲” and “▼” keys to move the cursor through
the different screens until it is positioned over the "COMMANDS"
screen. Press "OK" and use the “▲” and “▼” keys to view the different possible
operations. Press the "OK" key to perform an operation, and press the "OK" key again to confirm the operation.