FANOX SIL-D00, User Manual, Page: 91 / 226

www.fanox.com Rev.06 91/226
Configurable
inputs
Same voltage as the auxiliary power supply
6 configurable inputs
Configurable
outputs
250 Vac
– 8 A
30 Vdc
– 5 A
4 configurable outputs
•
Output 1 and output 2: NC + NO
•
Output 2 and output 4: NO
Frequency
50/60 Hz selectable by general settings
Current
measurement
Phase current (IA, IB, IC), neutral (IN) and maximum current (Imax)
Real RMS
Sampling: 16 samples/cycle
±2% Accuracy over a band of ±20% over the nominal current and 4% over the rest of the range
The measurement of IB is calculated and it is necessary a minimum of 0.25xIn for a correct
measurement.
Saturation limit: 30 times rated current
Voltage
measurement
Residual voltage (VR)
Real RMS
Sampling: 16 samples/cycle
±2% Accuracy in the range of 2 - 65V
Angle between VR
and IR
±2º Accuracy angle
Minimum current for a correct angle measurement: 0.3 x In
Minimum voltage for a correct angle measurement: 2V
Communications
LOCAL COMMUNICATION
1 Local port RS232: ModBus RTU
REMOTE COMMUNICATION (*)
1 remote port with the following options :
•
1 Remote port RS485: ModBus RTU or IEC 60870-5-103 (by general settings)
•
1 Remote port RJ45: IEC 61850, DNP3.0 TCP/IP or IEC 60870-104
Auxiliary power
24-220 Vdc /48-230 Vac ±20%
Environmental
conditions
Operating temperature : -10 to 70ºC
Storage temperature: -20 to 80ºC
Relative humidity: 95%
Transformers
Measurement 3 or 4 CT /5 or /1