FANOX SIL-D00, User Manual, Page: 205 / 226

www.fanox.com Rev.06 205/226
11.4. DNP3 protocol settings
Setting Name Type
Minimum
Value
Maximum
Value
Default
Value
Step Current Value
RTU Address Integer 0 65535 1 1
Validate Source Address Boolean 0 (No) 1 (Yes) 0 1
Application Confirm
Timeout Integer 0 4294967295 5000 1 msec.
Enable Unsol. Report Boolean 0 (No) 1 (Yes) 1 (Yes) 1
Source Address Integer 0 65534 4 1
Unsol. Retry Delay Integer 0 4294967295 2000 1 msec.
Unsol. Max Retries Integer 0 65535 3 1
Unsol. Offline Retry Delay Integer 0 4294967295 3000 1 msec.
RTU Address : Remote Terminal Unit Address.
Validate Source Address: Slave respond only if the source address in received requests
matches configured source.
Application Confirm Timeout: Specifies how long the slave DNP device will wait for an
application layer confirmation from the master.
Enable Unsolicited Reporting: Enables or disables Unsolicited responses.
Source Address: Destination address of the Master device to which the unsolicited responses
are to be sent.
Unsolicited Retry Delay: Specifies the time to delay after an unsolicited confirm timeout before
retrying the unsolicited response.
Unsolicited Max. Retries:
How many times should this slave resend Unsols before declaring
the station offline
Unsolicited Offline Retry Delay: How often to retry unsolicited responses after maxRetries
attempts