FANOX SIL-D00, User Manual, Page: 71 / 226

www.fanox.com Rev.06 71/226
Protection error: The self-diagnosis algorithms have detected a problem in the protection
block.
Setting change: This activates when the settings are changed.
Date-time adjustment: This activates when the date-time are synchronised.
Local: this is the sum of the "HMI activity" and "Local communication" bits from the "Local
communication" status group
Default settings , the equipment is set to default settings and does not execute the trip.
Eeprom Error: The self-diagnosis algorithms have detected a problem in the eeprom
memory, which contains the settings.
Eeprom change: this activates when the settings or configuration are changed. The
settings change which this indication includes are differentiated from the configuration
change, which are also stored in said memory.
Events error: The self-diagnosis algorithms have detected a corrupt event in the circular
buffer. This bit is reset by deleting the events (from the HMI or by using communications).
HMI Activity: this condition is active if any key has been pressed in the last 15 minutes.
Pressing a key implies that the relay is in local.
Local control / Telecontrol: It is enabled or there is no telecontrol.