Fagor CNC 8060, Operating Manual

Page: 88 / 172

Operating manual (MC).
CNC 8060
CNC 8065
3.
WORKING
WITH OPERATIONS OR
CYCLES
Si
mp
le rectangu
lar pocke
t.
·88·
(R
EF
: 1709)
Spindle turning direction (icon).
Machining direction (icon).
Programming of M functions.
I Penetration step.
• If programmed with a positive sign (I+), the cycle recalculates the step so all the
penetrations are identical with the same value as or smaller than the one programmed.
• If programmed with a negative sign (I-), the pocket is machined with the given pass (step)
except the last pass that machines the rest.
In either case, the cycle limits the step to the cutting length assigned to the tool in the tool table.
Fz Penetration feedrate.
F Surface milling feedrate.
S Spindle speed.
T Tool.
D Tool offset.
Clockwise.
Counterclockwise.
Clockwise.
Counterclockwise.
Activating or deactivating the execution of M functions before machining. The cycle allows
editing up to 4 M functions. To execute only some of them, define them first and leave the
rest of the data unprogrammed.
The editor will only show this option if the user has configured the editor to allow
programming M functions.