Fagor CNC 8060, Operating Manual

Page: 84 / 172

Operating manual (MC).
CNC 8060
CNC 8065
3.
WORKING
WITH OPERATIONS OR
CYCLES
Borin
g
with sp
ind
le orien
ta
ti
on.
·84·
(R
EF
: 1709)
3.10 Boring with spindle orientation.
Geometric parameters:
Machining parameters:
Spindle turning direction (icon).
X, Y Machining point.
Z Part surface coordinate.
Zs Safety plane coordinate.
Dp Part surface approach distance.
The editor will only show this data if the user has configured the editor to allow it. If this option
is not enabled, the cycle assumes an approach distance of 1 mm.
P Total depth.

Spindle position, in degrees, for the withdrawal.

x,

y Distance the tool must move to get the cutter off the wall before withdrawing.
F Feedrate.
S Spindle speed.
T Tool.
D Tool offset.
t Dwell at the bottom, in seconds.
Clockwise.
Counterclockwise.
The following example shows how to use parameters

,

x and

y. The spindle rest position
(I0 position) is at -30º with respect to the X axis.