manualshive.com logo in svg

Fagor CNC 8060, Operating Manual

Share
Download
Fagor CNC 8060 Operating Manual Download Page 141

Operating manual (MC).  

CNC 8060
CNC 8065

WORKING 

WITH OPERATIONS OR

 CYCLES

3.

Point-to-poi

nt p

ro

fi

le 

milli

ng.

·141·

(R

EF

: 1709)

 

The roughing operation defining parameters are: 

Spindle turning direction (icon). 

Programming of M functions. 

Next tool. 

Finishing stock on the side walls.

When working without tool radius compensation, there is no finishing operation, the finishing
stock (

) is ignored.

F

Milling feedrate.

S

Spindle speed.

T

Finishing tool.

If programmed T=0, there is no finishing.

D

Tool offset.

Clockwise.

Counterclockwise.

Activating or deactivating the execution of M functions before machining. The cycle allows
editing up to 4 M functions. To execute only some of them, define them first and leave the
rest of the data unprogrammed.
The editor will only show this option if the user has configured the editor to allow
programming M functions.

Activating or deactivating the preparation of the next tool. 
The editor will only show this option if the user has configured the editor to allow
programming the next tool.

Summary of Contents for CNC 8060













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands