Operating manual (MC).
CNC 8060
CNC 8065
3.
WORKING
WITH OPERATIONS OR
CYCLES
2D
pr
of
ile
p
o
cket
.
·110·
(R
EF
: 1709)
3.15.1
Executable pocket file
To simulate or execute this type of pockets, the CNC uses an executable file with geometry
information. This file is generated the first time the pocket is simulated or executed. If from
the editor, any data of the pocket geometry or the used tool, is modified, the CNC will generate
this file again.
The executable files are stored in the directory CNC8070 \Users \Pocket with the name of
the pocket (parameter P.2D) and the extension C2D. These files must not be deleted, moved
to another location or tampered with in any way. If when executing or simulating the pocket,
the CNC cannot find these files, it will generate them.
Overall, a 2D pocket consists of the following files.
pocket.P2D
Pocket composition.
profile.PXY
Plane profile.
pocket.C2D
Executable file.
The executable file is also updated after a software update and when executing or simulating
a pocket,
In versions prior to V2.00, the user generated the executable file from the editor before inserting the
cycle. From version V2.00 on, it is no longer necessary, the CNC is in charge of generating the
executable file when necessary.
i
Summary of Contents for CNC 8060
