Fagor CNC 8060, Operating Manual

Page: 159 / 172

CNC 8060
CNC 8065
4
·159·
(R
EF
: 1709)
SAVING PROGRAMS
Part-programs may be edited, saved, simulated and executed. Each one of these programs
is made up by concatenating simple operations or single cycles.
4.1 List of saved programs
Press [EDIT] to access the list of saved part-programs. The CNC will display the following
screen:
1 Softkey to start simulating the selected program.
2 Softkey to start executing the selected program.
3 Softkey to create a new program.
4 Softkey that changes the horizontal softkey menu. The sodtkeys appearing when
pressing this softkey are:
• Open program.
• Operations with blocks.
• Undo/Redo.
• Insert the cycle being edited.
5 Replace or insert the edited cycle.
6 Window that shows the cycles and ISO-coded blocks that make up the selected part. To
edit a cycle, put the cursor on the cycle press [RECALL].
7 Message bar.
8 This softkey shows the list of saved programs. In in this window, it is possible to move
through the list of programs. When selecting a program, the right window will show its
contents. To change the working folder, press [RECALL] while the focus is on the list and
a folder explorer will open to choose the new folder.
To toggle the focus between the list of programs and the part editor, press [CTRL][F2].
PROGRAM
PROGRAM
PROGRAM
1
2
3
4
5
7
8
6