Fagor CNC 8060, Operating Manual

Page: 106 / 172

Operating manual (MC).
CNC 8060
CNC 8065
3.
WORKING
WITH OPERATIONS OR
CYCLES
2D
pr
of
ile
p
o
cket
.
·106·
(R
EF
: 1709)
3.15 2D profile pocket.
A pocket consists of an outside contour and a number of inside contours called islands. All
the walls of 2D pockets are vertical.
It is recommended to previously define the #ROUNDPAR instruction in order to obtain a good
finish because the finishing passes are carried out in G05.
Geometric parameters:
The composition of the pocket and the profile in the plane is stored in \ Cnc8070\ Users\
Profile.
pocket.P2D Pocket composition.
profile.PXY Plane profile.
P.2D Name of the 2D pocket.
Once the pocket configuration has been validated, the CNC associates the geometry of the
pocket to its name.
P.XY Name of the plane profile.
The profile must indicate the pocket's outside contour and those of the islands.
Z Part surface coordinate.
Zs Safety plane coordinate.
P Total depth.