manualshive.com logo in svg

Fagor CNC 8060, Operating Manual

Share
Download
Fagor CNC 8060 Operating Manual Download Page 126

Operating manual (MC).  

CNC 8060
CNC 8065

3.

WORKING 

WITH OPERATIONS OR

 CYCLES

Rectangu

lar boss.

·126·

(R

EF

: 1709)

 

3.17

Rectangular boss.

The way the roughing and finishing blocks of this cycle are joined will be the one previously
set by the user with the instructions #HSC, G5, G50 or G7. We recommend to use #HSC
or G5 controlling the shape of the corner with the instruction #ROUNDPAR. 

Geometric parameters: 

Type of corner (icon).

X, Y

Corner of the boss.

L, H

Boss dimensions.

The sign indicates the orientation referred to the XY point.

Z

Part surface coordinate.

Zs

Safety plane coordinate.

P

Total depth.

Angle, in degrees, between the boss and the abscissa axis. The turn is carried out on the
defined corner, X,Y point.

Q

Amount of stock to be removed.

Square corner with icon.

Rounded corner with icon.

Chamfered corner with icon.

r

Rounding radius or chamfer size.

Summary of Contents for CNC 8060













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands