Fagor CNC 8060, Operating Manual

Page: 31 / 172

Operating manual (MC).
CNC 8060
CNC 8065
O
PERATING
IN JO
G MODE
2.
Introductio
n
·31·
(R
EF
: 1709)
2.1.2 Auxiliary screen of the conversational mode
1 Softkey for selecting units mm/inches.
2 Softkey to go into tool inspection.
3 Softkey to access the graphics in execution mode.
4 Softkey for selecting OFFSETS.
5 Softkey for tool calibration.
6 Window that shows the status of the G, F, T, D, M functions.
7 Window that shows:
• The selected tool (T).
• Graphic representation of the location code (shape).
• The (D) offset number associated with the selected tool.
8 Window showing the axis feedrate F currently selected, the % of F being applied and
the real F value.
9 Window that shows the value of the variables:
• Partc: It indicates the number of consecutive parts executed with the same part-
program. Every time a new program is selected, this variable is reset to "0".
• CyTime: It indicates the time elapsed while executing the part. It is given in "hours
: minutes : seconds : hundredths of a second" format. Every time a part-program
execution starts, even when repetitive, this variable is reset to "0".
• Timer: It indicates the count of the timer enabled by PLC. It is given in "hours : minutes
: seconds" format.
10 Window with spindle related information:
• The selected theoretical turning speed. S value when working in rpm and CSS value
when working at constant surface speed.
• The % of spindle speed being applied.
• Maximum spindle rpm (Smax).
• Active spindle range (gear).
11 Message bar.
12 Window with spindle related information:
• Theoretical speed.
• Speed in RPM.
• Speed in m/min.
1
2
3
4
5
11
12
13
14
7
8
9
6
10