Fagor CNC 8060, Operating Manual

Page: 151 / 172

Operating manual (MC).
CNC 8060
CNC 8065
WORKING
WITH OPERATIONS OR
CYCLES
3.
Slot milli
ng.
·151·
(R
EF
: 1709)
3.22.1 Basic operation.
1 It selects the roughing tool and starts the spindle in the requested direction.
2 Rapid movement (G0) to the roughing starting point and the safety plane (Zs). Depending
on the starting plane, it first moves in XY and then in Z or vice versa.
3 Rapid movement (G0) up to the approach plane.
4 Roughing operation. It is carried out in layers, until reaching the total depth minus the
finishing distance "

z".
First, penetration "I" at feedrate "Fz". Then, slot milling of the boss surface up to a distance
"

" from the side wall. The slot is carried out at feedrate "F" and, if necessary, it
recalculates the pass (

) so all the passes are identical. After done roughing, rapid
movement (G0), first up to the safety plane (Zs) and then to the starting point. And last,
rapid approach (G0) up to 1 mm off the machined surface.