Fagor CNC 8060, Operating Manual

Page: 160 / 172

Operating manual (MC).
CNC 8060
CNC 8065
4.
SAVING PROGRAMS
Edi
t a new pa
rt-pro
gram
·160·
(R
EF
: 1709)
4.2 Edit a new part-program
To edit a new program, proceed as follows:
1 Press [EDIT] to access the list of saved part-programs.
2 Press the vertical softkey "New program". The following options will appear:
• New: Entering a name in the dialog box and pressing the New button will create a
new empty file with that name.
• Copy: Entering a name in the dialog box and pressing the Copy button will create a
file with that name and all the cycles and ISO-coded blocks of the program selected
at the time on the list of programs will be copied into it.
• Cancel: To cancel the creation of a new program.
Keyboard shortcuts [CTRL][C] and [CTRL][V] may be used on the programs list to copy and
paste a program.
4.3 Delete a new part program
To delete a part-program, proceed as follows:
1 Press [EDIT] to access the list of saved part-programs.
2 Select, with the pointer, the part-program to be deleted from the left column. A program
cannot be deleted if it is being executed or simulated.
3 Press the [DEL] key.
The bottom of the screen will show a message requesting confirmation of the deleting
operation.
• If [ENTER] is pressed, the CNC will delete the selected program and will update the list
of saved programs.
• If [ESC] is pressed, the program will not be deleted and it will quit deleting operation.
4.4 Inserting comments in any part-program.
The block or cycle may be added at the end of the program, after the last operation or insert
it between 2 existing operations or replace it with one of the cycles of the program. To save
the cycle, proceed as follows:
1 Define the desired cycle assigning the relevant data to it.
2 Press the softkey "Save cycle" to access the list of part-programs.
3 Select the desired program in the left window. The right window shows the contents of
the part-program.
4 In the right window, place the cursor at the position where the edited cycle is to be inserted
or replaced.
5 Press the vertical softkey to replace or insert the edited cycle and select the desired
option.
4.5 Inserting a cycle in the current part-program.
The editor lets insert the cycle being edited directly into the current program in the cursor
position.
1 Define the desired cycle assigning the relevant data to it.
2 Press the [INS] key to insert the cycle into the current program in the cursor position.