Fagor 8025 M CNC, Translation Of The Original Manual

Page: 131 / 180

Remote modules.
CNC 8060
CNC 8065
RCS-S-4F4
AO (SERCOS-II
PROTOCOL).
7.
Vo
ltage sup
ply fo
r the modu
le.
·131·
(R
EF
: 1906)
7.5 Voltage supply for the module.
7.5.1 Voltage supply at 24 V DC.
Power the module with a 24 V DC ±10% 0.4 A power supply.
Connector pinout.
Power supply cable characteristics.
Use generic cable 12 AWG to 24 AWG.
Consumption.
Consumption: 10 W (maximum).
DO NOT make any connection or connect any module to the power supply while the latter is turned
on. Before making any connection, turn the power supply off by unplugging the power cable.
DO NOT make any connection or connect any module or cable if the group is under power. Before
connecting anything, unplug the cable from the power supply module.
Power supply.
Plug-in part 3-pole Phoenix-contact combicon connector (7.62
mm pitch). Rated current; 12 A.
Pin Signal. Function.
1 - - -.
2 11 0 V reference signal.
3 +24 V Power supply.
A22